Most drain line installations are normally fairly simple procedures so long as the appropriate planning is taken into account beforehand. Sometimes it could be necessary to call in an expert drain plumber, however, with the appropriate tools and a bit of know-how, this project is readily accomplished by the home-owner itself. Make certain to check with your regional codes so as to be certain that you are in your state's regulations.
Step 1: Plan the Piping
Many various kinds of fittings and piping exist, each made with the aim of functionality. When planning your system, bear in mind the various sizes you'll need and whether the sizing will change on the way. Knowing the angles to account for in addition to the diameter of the piping will finally determine what materials to buy.
Step 2: Cut the Pipe
Together with your goggles on, use the hacksaw to cut the lengths of pipe. Make sure you note which part goes where to be sure the method runs smooth as possible. When the tubes are cut, use a sheet of sandpaper to smooth the edges, and employ cleaning solvent to wash the ends.
Step 3: Check Your Measurements
Before gluing the ends, match the piping together to ensure that your measurements are correct. You'd hate to have halfway through before realizing a mistake. This way, you'll have the ability to tell whether the machine will work before making it permanent. Mark all fittings and components to use as a roadmap.